Quality Products for Finishing and Refinishing
Bare-Z-All Paint Remover
Bare-Z-All Paint Remover is non-toxic, has a low odor, contains no biohazardous materials and is safe for indoor and outdoor use around pets and plants. It is water rinsable, easy to clean up with soap and water, and needs no neutralizing or afterwash. Bare-Z-All Paint Remover effectively removes multiple coats of all finishes, and its semi-paste formulation clings to vertical surfaces. It is safe for glass, wood, metal, concrete and masonry, and will not raise wood grain or discolor wood. Application is safe and easy, no special applicators or removal tools are necessary.
Bare-Z-All Paint Remover is excellent for Historical, Residential and Commercial Renovation, Antiques and furniture refinishing and lead abatement.
Available in quarts, gallons, 5-gallon pails and 55-gallon drums.
Bare-Z-All Paint Remover is available through these leading distributors and dealers as well as other retailers: The Andersons, ICI Paint Stores, R.P.Johnson & Son, Ellsworth Builders Supply.
If you cannot find a dealer in your area, you may order online or you may call Star Bronze Customer Service at 1-800-533-9332.
Directions
Bare-Z-All is formulated using the newest state of the art paint removal technology. This user friendly formulation of active ingredients and water is designed to penetrate and electrostatically de-bond paint from the substrate.
For use on wood, metal, stone, concrete, masonry, canvas, leather or fiberglass. Do not use on nylon, linoleum, cultured marble, plastic or asphalt.
Preparation: For best results apply between 65°F and 95°F. Do not use when below 55°F. Protect areas not being stripped with plastic/polyethylene sheeting and masking/painter’s tape.
Application: Apply liberally with a brush, ½” nap paint roller, or flexible putty knife, completely covering the surface to be stripped (approx. 1/16” thick). Do not brush out too thin. In areas of very low humidity, high temperatures and/or constant breeze, a second application may be necessary.
Removal: Allow the paint remover to completely penetrate the coating. Penetration will vary from 30 minutes to 36 hours depending on the type of paint, the number of coats and whether an interior or exterior application. Check applied area periodically. Use a putty knife or paint scraper to remove paint from flat surfaces or a stiff bristle brush for detailed areas. After initial lifting, use a stiff brush or stripping pad with water or TSP solution to remove remaining residue.
May raise wood grain. Sand prior to applying paint or finish. Surface should be completely dry before refinishing.
Cautions and Warnings
USE ONLY WITH ADEQUATE VENTILATION. Vapors are heavier than air, do not use in basement or unventilated areas.
Avoid inhalation, ingestion, contact with eyes, skin and clothing. May be harmful if absorbed through the skin. Wear eye protection and gloves (impervious). Wash thoroughly after handling.
Close container tightly after each use. Store and transport in upright position.
FIRST AID: EYE CONTACT: Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Get medical attention. SKIN CONTACT: Flush area with plenty of water. Get medical attention if irritation persists. INGESTION: If swallowed do not induce vomiting. Give plenty of water to drink. Get medical attention immediately.
KEEP OUT OF REACH OF CHILDREN
WARNING: This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.
VOC vapor pressure 0.04 mm Hg @ 20° C
298 grams VOC per liter of material
Photochemically reactive
Bare-Z-All Remover
No Harsh Chemicals
